HBXHZ Hospital Neonate Bilirubin Phototherapy Infant Care Equipment
Brief Introduction Baby mode control by micro-computer; Failure alarm indication; Blue light radiation in two sides; Timer for phototherapy caring time; Bassinet can be pulled out from the side door. DC motor
Standard configuration Above case (including above lamp, controller and infant bed); Nether case (including nether lamp and cabinet);Skin temperature sensor;I.V.Pole.
Optional Configuration: LED blue light sa upper case light source;
Disposable skin temperature sensor is optional.
Specification Power requirement: AC220V-230V/50Hz or AC110-120V/50-60Hz, 600VA Mode of control: Air mode control by micro-computer Temperature control range: 25-34°C Skin temperature sensor display range: 5°C -65°C Correlation of displayed average value and actual average value ( steady temperature condition )≤0.8°C Accuracy of skin temperature sensor: ±0.3°C Temperature uniformity of the bed≤ 2.0°C Noise level above the bed: 55dB(A) Failure alarm: over-temperature alarm; deviation alarm, sensor failure alarm, fan failure alarm and check alarm. The total irradiance for bilirubin on the effective surface area: Above case≥1.5mw/cm2 (blue fluorescent lamp) ≥ 2.0 mw/cm2(LED blue light) Nether case≥3.0 mw/cm2 Average value of general bilirubin radiation on the effective surface area: Above case≥1.4mw/cm2 (blue fluorescent lamp) ≥1.5mw/cm2 (LED blue light) Nether case: 2.5mw/cm2 Uniformity of the total irradiance for bilirubin: >0.4 Dominant wavelength of blue light: 400nm-550nm
Environmental temperature: Operating range : 18 °C -28°C Ambient air movement rate: <0.3m/s Product Packaging: Package: each unit is packed into two cartons Dimension (Main body): 1000mm x 700mm x 805mm (Cabinet): 900mm x 600mm x 885mm Gross Weight (Main body): 70Kg (Cabinet): 50Kg