| Customization: | Available |
|---|---|
| Material: | Metal |
| Type: | Manual Bed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Specifications:
1. The bed surface adopts 1.0mm tensile cold-rolled steel plate punching molding, which increases the strength of the bed plate. Good air permeability, prevent mattress moisture. Epoxy powder coated finish with permeable, smooth bed surface with holes for preventing bedsores. The fully tested rugged construction can withstand maximum user weight, up to 240 kg.
2. This manual bed has adjustable feet, head and overall height. Air spring lifting power assist device, easy to complete lifting function, can meet your personal needs.
3. The manual crank is located at the foot of the bed with 3 separate manual cranks that can be folded up and hidden to prevent injury. It is used to adjust the overall height of the knees, back and bed to provide great comfort according to the patient's needs.
4. Four ABS guardrails on the side are equipped with Angle indicators, through which nursing staff can monitor the patient's head Angle.
L-type six-grade aluminum alloy guardrail is optional, with locking parts and anti-hand clamping device. The overall height of guardrail is 420mm.
5. The head/end of the bed adopts ABS injection molding technology, anti-aging and antibacterial. Head board and foot board adopt automatic locking device. In case of emergency, it is convenient to disassemble rescue, special care and safe transport of patients. Head and foot board all have grasp handle that designs by human body engineering principle, facilitate carry out.
6.4 5-inch central control casters. Casters are built with fully enclosed self-lubricating bearings to prevent foreign matter from being involved. The braking system keeps the bed fixed at all times.
7. The four corners of the bed are equipped with anti-collision wheels, which are made of plastic and protrude outside the bed body. There are wooden side bumpers on both sides, which can effectively prevent the hospital bed from colliding directly with elevator, door frame and other planar obstacles during operation and use, thus ensuring a smooth transition.
8. Four corners with infusion stand jacks and drainage hooks, infusion stand is optional.
Parameters:
| Specification | |
| Model | BAM308 |
| Measure | |
| Length: | 2130mm |
| Width: | 1000mm |
| Height | 460-740mm |
| Technical Features | |
| Backrest max upward angle | 0-75° |
| Footrest max upward angle: | 0-45° |
| Loading Capacity | |
| Loading Capacity | 240kg |
| Power supply | 220VAC or 110VAC Frequency: 50-60HZ |
| Power Plug:EU type standard if other type, confirm each order | |
| Optional | Matress |
| IV POLE | |
| The Weighing Function | |
| Extension bedplate | |
| Over Bed table | |
| beside locker | |
){kind=link}